JET COLLET
- COLLETS
- PULL STUDS
- CLAMPING NUTS
-
TOOLHOLDERS
-
TC - DIN69871
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansion Chucks
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder Slim Type
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chucks
- Drill Chucks For Hex Key
- Morse Taper for Drills/Mills
- Blank Arbors
- Test Arbors
-
MAS403-BT/JIS6339
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansion Chucks
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chucks
- Drill Chucks For Hex Key
- Morse taper for Drills/Mills
- Blank Arbors
- Test Arbors
- Double Contact
-
HSK-DIN69893
-
Form A
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansions Chuck
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chuck For Hex Key
- Morse Taper For Drills/Mills
- Blank Arbors
- Test Arbors
- Form C
- Form E
- Form F
-
Form A
- CAPTO
- DIN2080
- VARILOCK SYSTEM
- STRAIGHT SHANK
- FLOATING REAMER HOLDERS
- SPECIALS
-
TC - DIN69871
-
ACCESSORIES
- ASSEMBLY DEVICE
- TOOLHOLDER BUSHING
- PRECISION CENTERING DEVICE
- HSK COOLING TUBE
-
WRENCHES FOR NUTS
- FOR MINI CLAMPING NUT DIN 6499
- FOR STANDARD CLAMPING NUT DIN 6499
- FOR HEXAGONAL CLAMPING NUT
- WRENCH FOR NUT FORM A
- FOR CLAMPING NUT EOC DIN 6388
- STANDARD DYNAMOMETRIC
- MINI DYNAMOMETRIC
- ROLLER BEARING STANDARD
- ROLLER BEARING DYNAMOMETRIC WRENCH
- DIGITAL DYNAMOMETRIC WRENCH
- INTERCHANGEABLE HEADS
- DYNAMOMETRIC WRENCH FOR CLAMPING NUTS
- DYNAMOMETRIC WRENCH FOR HEXAGONAL CLAMPING NUTS
- MORSE TAPER ADAPTERS
- CPT COOLING TUBE
- WRENCH FOR DRILL CHUCK SPARE PARTS
- WRENCH FOR CROSS SCREW
- WRENCH FOR ROUNDHEAD SCREW
JET COLLET
EXTERNALLY COOLED COLLETS
TECHNICAL FEATURES
- •Concentricity of ER JET EXTERNALLY COOLED COLLETS is contained in 0,008 mm.
- • Manufactured in spring steel
- • Grounded both externally and internally; after this operation there is an additional phase of finishing, which guarantees a grade of roughness lower than Rz 2,5.
- • The vulcanization of the cut, channels the coolant inside the holes of the collet, allowing it to reach the tool.
- • Max pressure 40 Bar.
| TYPE | ØD | STEP | L |
| ER 16JET |
3 ÷7
|
0.5 | 27.5 |
| ER 20JET |
4 ÷ 10
|
0.5 | 31.5 |
| ER 25JET |
3 ÷ 14
|
0.5 | 34 |
| ER 32JET |
3 ÷ 20
|
0.5 | 40 |
| ER 40JET |
4 ÷ 25
|
0.5 | 46 |
EXTERNALLY COOLED COLLETS
TECHNICAL FEATURES
- •Concentricity of ER JET EXTERNALLY COOLED COLLETS is contained in 0,008 mm.
- • Manufactured in spring steel
- • Grounded both externally and internally; after this operation there is an additional phase of finishing, which guarantees a grade of roughness lower than Rz 2,5.
- • The vulcanization of the cut, channels the coolant inside the holes of the collet, allowing it to reach the tool.
- • Max pressure 40 Bar.
| TYPE | ØD | STEP | L |
| ER 16JET |
3 ÷7
|
0.5 | 27.5 |
| ER 20JET |
4 ÷ 10
|
0.5 | 31.5 |
| ER 25JET |
3 ÷ 14
|
0.5 | 34 |
| ER 32JET |
3 ÷ 20
|
0.5 | 40 |
| ER 40JET |
4 ÷ 25
|
0.5 | 46 |
