ER 16 - METRIC - 426 E
- COLLETS
- PULL STUDS
- CLAMPING NUTS
-
TOOLHOLDERS
-
TC - DIN69871
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansion Chucks
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder Slim Type
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chucks
- Drill Chucks For Hex Key
- Morse Taper for Drills/Mills
- Blank Arbors
- Test Arbors
-
MAS403-BT/JIS6339
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansion Chucks
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chucks
- Drill Chucks For Hex Key
- Morse taper for Drills/Mills
- Blank Arbors
- Test Arbors
- Double Contact
-
HSK-DIN69893
-
Form A
- Shrink Fit Holders Standard
- Shrink Fit Holders Slim Type
- Collet Chuck for SKS
- For Screwed Milling Cutters
- Power Milling Chucks
- Hydraulic Expansions Chuck
- Collet Chuck for ER DIN6499
- Collet Chuck for EOC DIN6388
- End Mill Holders
- End Mill Holder With External Coolant
- Whistle Notch Tool Holder
- Shell End Mill Holders
- Combi Shell End Mill Holders
- Drill Chuck For Hex Key
- Morse Taper For Drills/Mills
- Blank Arbors
- Test Arbors
- Form C
- Form E
- Form F
-
Form A
- CAPTO
- DIN2080
- VARILOCK SYSTEM
- STRAIGHT SHANK
- FLOATING REAMER HOLDERS
- SPECIALS
-
TC - DIN69871
-
ACCESSORIES
- ASSEMBLY DEVICE
- TOOLHOLDER BUSHING
- PRECISION CENTERING DEVICE
- HSK COOLING TUBE
-
WRENCHES FOR NUTS
- FOR MINI CLAMPING NUT DIN 6499
- FOR STANDARD CLAMPING NUT DIN 6499
- FOR HEXAGONAL CLAMPING NUT
- WRENCH FOR NUT FORM A
- FOR CLAMPING NUT EOC DIN 6388
- STANDARD DYNAMOMETRIC
- MINI DYNAMOMETRIC
- ROLLER BEARING STANDARD
- ROLLER BEARING DYNAMOMETRIC WRENCH
- DIGITAL DYNAMOMETRIC WRENCH
- INTERCHANGEABLE HEADS
- DYNAMOMETRIC WRENCH FOR CLAMPING NUTS
- DYNAMOMETRIC WRENCH FOR HEXAGONAL CLAMPING NUTS
- MORSE TAPER ADAPTERS
- CPT COOLING TUBE
- WRENCH FOR DRILL CHUCK SPARE PARTS
- WRENCH FOR CROSS SCREW
- WRENCH FOR ROUNDHEAD SCREW
ER 16 - METRIC - 426 E There are 19 products.
ER 16 - MEGA PRECISION
The precision level 0.002 is guaranteed ONLY FOR THE NOMINAL DIAMETER
The collet clamping range is 0.5
ER 16 - MEGA PRECISION
The precision level 0.002 is guaranteed ONLY FOR THE NOMINAL DIAMETER
The collet clamping range is 0.5
| Cod. | ØD | ØB | L | ß | Act. |
| ERX.16.MP.1 | 1 | 17 | 27.5 | 8° |
|
| ERX.16.MP.1.5 | 1.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.2 | 2 | 17 | 27.5 | 8° |
|
| ERX.16.MP.2.5 | 2.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.3 | 3 | 17 | 27.5 | 8° |
|
| ERX.16.MP.3.5 | 3.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.4 | 4 | 17 | 27.5 | 8° |
|
| ERX.16.MP.4.5 | 4.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.5 | 5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.5.5 | 5.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.6 | 6 | 17 | 27.5 | 8° |
|
| ERX.16.MP.6.5 | 6.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.7 | 7 | 17 | 27.5 | 8° |
|
| ERX.16.MP.7.5 | 7.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.8 | 8 | 17 | 27.5 | 8° |
|
| ERX.16.MP.8.5 | 8.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.9 | 9 | 17 | 27.5 | 8° |
|
| ERX.16.MP.9.5 | 9.5 | 17 | 27.5 | 8° |
|
| ERX.16.MP.10 | 10 | 17 | 27.5 | 8° |
|
Showing 1 - 19 of 19 items