HSK-DIN69893

HSK-DIN69893 

TOOLHOLDERS HSK-DIN69893

Serinex produces toolholders with 4 types of HSK joint:

HSK toolholders are produced in certified steel in compliance with international standards and procedures dictated by ISO 9001: 2015 certificates.

TOOLHOLDERS HSK-DIN69893

Serinex produces toolholders with 4 types of HSK joint:

HSK toolholders are produced in certified steel in compliance with international standards and procedures dictated by ISO 9001: 2015 certificates.

  • Form A

    HSK - DIN 69893 FORM A

    mandrini HSK forma A

    TECHNICAL FEATURES

    • • Manufactured with certificate steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads
    • • Tested with high precision inspection and ganging equipment
    • • Taper accuracy of HSK-A shanks lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

    HSK D D1 D2 B3 L1 L2 L3 F1 F2 COOLANT TUBE
    32 32 24 26 7 16 8,92 16 20 35 M10X1
    40 40 30 34 8 20 11,42 16 20 35 M12X1
    50 50 38 42 10,54 25 14,13 18 26 42 M16X1
    63 63 48 53 12,54 32 18,13 18 26 42 M18X1
    80 80 60 68 16,04 40 22,85 18 26 42 M20X1,5
    100 100 75 85 20,02 50 28,56 20 29 45 M24X1,5

    disegno HSK Forma A

  • Form C

    HSK - DIN 69893 FORMA C

    TECHNICAL FEATURES

    • • Manufactured with certified steel
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • Taper accuracy of HSK-C shanks lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

    HSK D D1 D2 B3 L1 L2 L3 F1 F2 COOLANT TUBE
    32 32 24 26 7 16 8,92 16 20 35 M10X1
    40 40 30 34 8 20 11,42 16 20 35 M12X1
    50 50 38 42 10,54 25 14,13 18 26 42 M16X1
    63 63 48 53 12,54 32 18,13 18 26 42 M18X1
    80 80 60 68 16,04 40 22,85 18 26 42 M20X1,5
    100 100 75 88 20,02 50 28,56 20 29 45 M24X1,5

    disegno HSK Forma C

  • Form E

    HSK - DIN 69893 FORM E

    TECHNICAL FEATURES

    • • Manufactured with certified steel
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment
    • • Taper accuracy of HSK-E shanks lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

    HSK D D1 D2 L1 L2 L3 F1 F2 COOLANT SCREW
    25 32 19 20 13 10,5 - 10 20 M5X10
    32 32 24 26 16 8,92 16 20 35 M10X1
    40 40 30 34 20 11,42 16 20 35 M12X1
    50 50 38 42 25 14,13 18 26 42 M16X1
    63 63 48 53 32 18,13 18 26 42 M18X1
    80 80 60 68 40 22,85 18 26 42 M20X1,5
    100 100 75 85 50 28,56 20 29 45 M24X1,5

    disegno HSK Forma E

  • Form F

    HSK - DIN 69893 FORM F

    TECHNICAL FEATURES

    • • Manufactured with certified steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment
    • • Taper accuracy of HSK-F shanks lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

    HSK D D1 D2 L1 L2 L3 F1 F2 COOLANT TUBE
    50 50 30 42 20 11,42 18 26 42 M16X1
    63 63 38 53 25 14,13 18 26 42 M18X1