Form E

Form E 

HSK - DIN 69893 FORM E

TECHNICAL FEATURES

  • • Manufactured with certified steel
  • • Heat treatments are performed by certified suppliers ISO 9001.
  • • Precision ground on shank, inside tapers and collet nut threads.
  • • Tested with high precision inspection and ganging equipment
  • • Taper accuracy of HSK-E shanks lower than AT2.
  • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

HSK D D1 D2 L1 L2 L3 F1 F2 COOLANT SCREW
25 32 19 20 13 10,5 - 10 20 M5X10
32 32 24 26 16 8,92 16 20 35 M10X1
40 40 30 34 20 11,42 16 20 35 M12X1
50 50 38 42 25 14,13 18 26 42 M16X1
63 63 48 53 32 18,13 18 26 42 M18X1
80 80 60 68 40 22,85 18 26 42 M20X1,5
100 100 75 85 50 28,56 20 29 45 M24X1,5

disegno HSK Forma E

HSK - DIN 69893 FORM E

TECHNICAL FEATURES

  • • Manufactured with certified steel
  • • Heat treatments are performed by certified suppliers ISO 9001.
  • • Precision ground on shank, inside tapers and collet nut threads.
  • • Tested with high precision inspection and ganging equipment
  • • Taper accuracy of HSK-E shanks lower than AT2.
  • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

HSK D D1 D2 L1 L2 L3 F1 F2 COOLANT SCREW
25 32 19 20 13 10,5 - 10 20 M5X10
32 32 24 26 16 8,92 16 20 35 M10X1
40 40 30 34 20 11,42 16 20 35 M12X1
50 50 38 42 25 14,13 18 26 42 M16X1
63 63 48 53 32 18,13 18 26 42 M18X1
80 80 60 68 40 22,85 18 26 42 M20X1,5
100 100 75 85 50 28,56 20 29 45 M24X1,5

disegno HSK Forma E